F1+ (Grey)

67,50 

3 in stock

SKU: FG Category:

Description

F1+ Blend is the blend especially made for SLA 3D printers, such as Formlabs. The F1+ is also compatible with Formlabs PreForm software. Simply choose the appropriate color and parameter V02. Then, compose the height of the layer. Due to the very high detail of the blend, especially the black version, amazing detail results are achievable at a layer height of 0.05 and 0.02 mm.

F1 + blends are compatible with our pigments. Depending on the pigments added, you may need to choose a different color setting in the PreForm software: lighter colors require lighter color settings in the software.

Characteristics:

  • Package: 1 kg
  • Color: Clear (transparent), White, Gray or Black (opaque)
  • Odor: Faint odor
  • Viscosity: 95 mPa.s at 25°C
  • Hardness Shore D: 80
  • Density: 1.02 g/cm³
  • Shrinkage: <0.5%
  • Z-axis resolution (layer height): from 20 to 200 μm
  • UV cure: from 225 to 415 nm
  • Storage: 10°C< t >40°C, in dark, dry place out of direct sunlight
  • Wash up: 40-60% ethyl alcohol, isopropyl alcohol or TEK1960

What does the box contain?
Resin FunToDo F1+ NXT GEN (1 kg)

Additional information

Weight 1 kg
Dimensions 9 × 9 × 25 cm
Color

Grey

Compatibility

Suitable for most SLA 3D printers. To confirm compatibility with your printer, write to info@funtodo.eu.

Resin type

Model

Reviews

There are no reviews yet.

Be the first to review “F1+ (Grey)”

Your email address will not be published.