Castable Blend 5kg

GET A PREMIUM DISCOUNT ON 5KG OF CASTABLE BLEND 3D RESIN

​The Castable Blend has been designed to cast your pieces in bronze, copper, tin or iron using standard vacuum investment casting methods and settings. It is an Ideal resin for casting pieces of art, Toy models, machine parts. The fully cured resin has a hardness of 73 shore D.

Available in Red only.

Most often, this polymer is used to create high-precision metal parts, and is also widely used in jewelry. For casting glossy jewelry, Plasticast molds can be used. For ordinary products – Satincast.

Important! Since the polymer does not melt, but burns out, the muffle furnace must be forced-ventilated to achieve the best result.

Castable Blend Characteristics:

• Color: Red (opaque)
• Odor: Faint odor
• Viscosity: 85 mPa.s at 25°C
• Hardness Shore D: 73
• Density: 1.06 g/cm³
• Shrinkage: <0.5%
• Ash content: <0.1%
• Z-axis resolution (layer height): from 20 to 200 μm
• UV cure: from 225 to 415 nm
• Storage: 10°C< t >40°C, in dark, dry place out of direct sunlight
• Wash up: 40-60% ethyl alcohol, isopropyl alcohol or TEK1960

More about all our resins and products you can learn from the article What is FunToDo 3D resin?